TFT Display Konnwei Scan Tool OBD2 Scanner Tool For VW/Audi/Seat Full System
KW450 is a car diagnostic tool for Vag. It supports full system(Engine, transmission, abs brake, srs airbag) for VW/AUDI. It can read/erase fault code, read live data, BAT check, oil reset, EPB reset and so on.
| Item type | KW450 fault code reader |
| Display | TFT color display |
| Operating Temperature | 0 to 60°C (32 to 140 F° ) |
| Storage Temperature | -20 to 70°C (-4 to 158 F° ) |
| Dimensions(L,W,H) | 199 x 105 x 38 mm |
| Weight | 0.5kg |
| Housing material | ABS |
| Chip | Imported STM32F103VCT6 |
| Support system | XP WIN7 WIN8 WIN10 |
| Housing Color | Black |
| Support protocols | CAN, J1850 VPW, J1850 PWM, ISO 9141, KWP2000, SAE J1850 |
Function:
1) Read Codes
2) Erase Codes
3) Live Data
4) View Freeze Frame
5) I/M Readiness
6) O2 Monitor Test
7) On-Board Monitor Test
8) Component Test
9) Vehicle Info
10 ) BAT Check
11 ) Modules Present
12 ) DTC Lookup
13 ) Review Data
14 ) Print Data
15) Oil Reset
16) EPB Reset
....
KW450 obd scanner obd2 Vehicle Coverage:
It is for vw, audi, seat, skoda full system. The scan tool is specially designed to work with all OBD II compliant vehicles, including control area network (CAN), it is required by EPA that all 1996 and newer vehicles (Cars and light trucks) sold in the united states must be OBD II compliant and this includes all american, asian and European vehicles.
VWDiagnose
This function is specially designed to diagnose the 101 electronic control systems of a single vehicle Model
Common controlunit
This function is a common control system fault code , data stream and version reading, and clear fault code.
All controlunit
This function is all control system fault code , data stream and version reading, and clear fault code.
System controlunit
This function is to scan the common system one by one and read if there is a fault and display
Gatewayscan
This gateway can quickly scan the ECU of the vehicle (some vehicles have their own gateway system, tool can get the ECU information of the vehicle by talking with the gateway which ECU is supported and whether there are a fault)
Update Method:
To update your tool, you need the following items.
1. scan tool
2. A PC or laptop with USB ports
3. USB cable
1) Download the applicationUPlink.exefrom our website: www.konnwei.com
2) Run UPlink.exe in your computer(Mac iOS and Linux does not compatible)
3) Pressany button until the USB cable is connected with computer and release it after the tool display a message“Update mode"
4) Open the UPlink software, click "Check Update" button, will download the upgrade file from the internet then update to tester tool
5) Wait for few minutes until update succeed
6) After the update is completed, restart tester tool finish the whole updateSee bellow:
NOTE: when you made a wrong choice and the tool is unable to work properly, you may need to update the programs. Keep holding any key on the tool for a long time, and then Connect the tool to the computer via a USB at the same time, USB cable will force the tool into update mode to refresh the program.
Packing List:
1*KW450 obd obd2 scanner
1*User's Manual in English
1*OBD2 Cable
1*USB Cable
1*Protective Polyester Bag
More pictures of KW450 OBD2 Scanner Codes
Product Tags:
|
|
2.8inch TFT Display KW450 Airbag Engine oil reset Konnwei Scan Tool For VW Images
|
